现代加筋土技术应用与研究进展

对土工合成材料研究与应用概况、加筋土的国内外应用与研究进展、加筋土基本理论研究进展进行了综合分析,提出了今后研究工作的重点。     

稀土处理玻璃纤维填充聚四氟乙烯复合材料在油润滑下的摩擦学性能

分别用偶联剂、稀土以及偶联剂 -稀土混合物处理玻璃纤维表面 ,以改善玻璃纤维与聚四氟乙烯之间的界面结合力 ,考察了玻璃纤维填充聚四氟乙烯复合材料在油润滑下的摩擦学性能 .结果表明 :在油润滑条件下 ,表面处理玻璃纤维填充聚四氟乙烯复合材料的摩擦系数比未经处理玻璃纤维填充聚四氟乙烯复合材料的低 ,耐磨性亦较优 ;而稀土处理玻璃纤维填充聚四氟乙烯复合材料具有最低的摩擦系数及最高的耐磨性和极限 pv值 ;未经处理玻璃纤维填充聚四氟乙烯复合材料的磨损形式主要为粘着转移 ,偶联剂处理玻璃纤维填充聚四氟乙烯复合材料和偶联剂与稀土处理玻璃纤维填充聚四氟乙烯复合材料均以磨粒磨损为主 ,而稀土处理玻璃纤维填充聚四氟乙烯复合材料的磨损机理主要为粘着磨损和轻微磨粒磨损     

金—稀土合金电刷丝的磨损机理研究

采用扫描电子显微镜、微区电子探针及 X射线光电子能谱等分析测试技术考察了金 -稀土合金电刷丝摩擦副的磨损机理 .结果表明 :该摩擦副的摩擦磨损机理为轻微粘着磨损 ;合金中稀土元素发生偏聚 ;在摩擦升温过程中 ,稀土元素向合金表面扩散富集 ,摩擦副接触表面氧化层不断生成和磨损 ,从而降低电刷丝的表面能 ,使摩擦副的接触表面粘着能降低 ,从而改善其摩擦磨损     

Upper bound limit analysis of active earth pressure with different fracture surface and nonlinear yield criterion

Conventional calculations of static and seismic active earth pressures of soils on a retaining wall are formulated assuming the soils obeying a linear Mohr–Coulomb yield criterion. However, experimental evidences show that the strength envelopes of almost all geomaterials are nonlinear in nature over a wide range of normal stresses. In this paper, the strength envelope of the backfill behind a retaining wall is considered to follow a nonlinear yield criterion. A simple method is proposed for calculating the static and seismic active earth pressures acting against a retaining wall using a nonlinear yield criterion. This method is based on the upper bound theorem of limit analysis. Both translational and rotational fracture surfaces are employed in the formulation for calculating active earth pressures. Quasi-static representation of earthquake effects using a seismic coefficient concept is adopted for seismic active earth pressure calculations. Instead of using directly the actual nonlinear yield criterion, a linear Mohr–Coulomb yield criterion, which is tangential to the nonlinear yield criterion, is used to formulate the active earth pressure problem as a classical nonlinear programming problem. A nonlinear sequential quadratic programming algorithm is used to search for the maximum solution. In order to assess the validity of the proposed method, values of active earth pressures for different values of seismic coefficients and nonlinear parameters in the yield criterion are calculated and compared with solutions obtained using an extended Rankine’s active earth pressure theory. For the case of static active earth pressure, the upper bound solutions using the present method with a translational fracture surface are equal to the extended Rankine’s theoretical solutions and are slightly smaller than those obtained using the present method with a rotational fracture surface. For the case of seismic active earth pressure, numerical results obtained using the present method with a rotational fracture surface is very close to the extended Rankine’s theoretical solutions. A study is conducted to investigate the effects of the parameters in the nonlinear yield criterion on the active earth pressures.     

Studies on the Uptake of Rare Earth Elements on Polyacrylamidoxime Resins from Natural Concentrate Leachate Solutions

Synthesis of poly(acrylamidoxime) resin from polyacrylonitrile performed with different crosslinking ratios 2, 5, and 10 wt% of divinylbenzene as crosslinking agent, using methylbenzoate and dioctylphthalate as pore producing solvent, the reaction mixture occurred under nitrogen. Studies carried out on diluted solution from rare earth elements (REEs) concentrate contains impurities as Cu²⁺, Ni²⁺, Zn²⁺, Fe³⁺, Al³⁺, Si⁴⁺, Th⁴⁺, U⁶⁺, Ca²⁺, and K⁺. Changing some parameters as pH of the solution, time of feeding and type of acid as HCl, HNO₃, H₂SO₄. The adsorption efficiency of resin is in the order pH 6 > pH 5 > pH 4 > pH 2 with excluding pH 6 due to the precipitation of some of REEs with the impurities and complete precipitation of Dy ion during pH adjustment, the adsorption in HNO₃ > HCl > H₂SO₄ media.     

Light Emitting Diodes Prepared from Terbium‐Immobilized Polyurea Chelates

Abstract

This article describes the synthesis and application of poly(1,4‐phenylene‐2,6‐pyridylurea) (MCPU) as a charge transporting and rare earth metal chelating host matrix for organic light emitting diodes (OLEDs). The chelation between MCPU and Terbium (Tb³⁺) (the rare earth metal used in this study), is facile in nature and persists in thin films obtained by spin coating onto various substrates. Multiple polymer chelating moieties at each Tb ion site may derive from MCPU repeat units from a single polymer chain or two polymer chains, and their respective structures are proposed. The emissive properties of these films in the presence and absence of Terbium (Tb³⁺) were characterized by steady state UV‐VIS absorption spectroscopy and photoluminescence (PL) spectroscopy. The PL emission from Tb(MCPU) films indicate contribution from both the host MCPU and the Tb ions. The incorporation of these films in OLEDs employing different device architectures yields electroluminescence spectra, which show the characteristic emission of the Tb ions but no emission from the host polymer matrix. Although these devices are not optimized, they exhibit an order of magnitude higher external quantum efficiency as compared to that of conventional aluminum tris 8‐hydroxyquinoline (Alq₃) based OLEDs, at low current densities.     

惰气熔融-红外光谱法测定镨钕镝中的氧

研究了惰性气体-红外光谱法测定镨钕镝合金中的氧,采用石墨套坩埚和高纯镍篮,在4500W的分析功率下,对0.1g实际样品进行分析,取得了满意的效果。实验结果表明,样品释放完全,测定结果相对标准偏差(RSD,n=5)为1.9%,以GSBH40104—1996标准样品(ω(O)/%=0.00943)进行加标回收实验,回收率测量结果为95%～108%。     

Color tuning of up-conversion emission in ytterbium,erbium, aluminum tri-doped zinc oxide crystal by adjusting aluminum concentration

Ytterbium, erbium, aluminum tri-doped zinc oxide crystal was synthesized, which can turn color from red to green up-conversion luminescence through adjusting aluminum content. When the aluminum concentration reached 4?mol%, the color of up-conversion emission first turn from red to green. Meanwhile, the ratio of red to green emission reduced from 25.32 to 0.26, and the coordinates of chromaticity coordinate calculation changes from (0.5749, 0.3378) to (0.2190, 0.7169) with aluminum concentration range from 0 to 4?mol%. The up-conversion emission peaks at 521, 542, and 660?nm of sample originate from the transitions of ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2, and ⁴F_9/2 → ⁴I_15/2 of erbium ions, respectively. X-ray diffraction patterns perform the better crystallization degree with increasing aluminum concentration. The scanning electron microscopy images show the porous and lamellar structures with different aluminum concentrations. A convenient but effective design to obtain ytterbium, erbium, aluminum tri-doped zinc oxide up-conversion luminescence is reported, which can turn color from red to green.     

A Study on Photoacoustic Phase Spectra of Rare Earth Complexes with Oxine

Photoacoustic phase is the time delay that occurs from light to acoustic signal. the phase includes two components: one is the time delay that occurs during the process in which light absorbed by a sample converts into heat; the other is the time delay caused from heat to acoustic signal. a modified formula of PA phase is presented based on the R-G theory considering the phase caused by non-radiative relaxation processes. the phase is associated with absorption coefficient (β), thermal diffusion length of sample (μ_s), the longest lifetime of all excited states (r), and the ratio of rapid to slow heat component (R). When the photoacoustic signal is saturated the phase is associated with only T and R. the effect of different rare earth ions on the PA phase spectra of the ligand (oxine) in the rare earth complexes are reported and are well explained by using the phase formula of PA saturation.